punto_gt

iTrader: (1)

just put a blitz bov on my car and i cant get it to dump. ive tried undoing the 10mm nut and turning the allen key screw right out and all the way in, when i rev the car on idle the piston doesnt seem to be opening and closing, do i just take it bits and re-grease everything ?? thanks chaps. its second hand, but was working perfect before. thanks

nickwrxstiV2

My HKS doesn't really make a noise if revving at a standstill. Have you taken it for a run yet?

punto_gt

iTrader: (1)

yea i took it out. the car was upto tempratue. my baileys works fine so theres no problems with the car it runs perfect

4evermad

iTrader: (1)

i took my hks one to bits a good clean with brake cleaner and bingo ... dont lube it as thay all run dry and prob would smell with heat .

punto_gt

iTrader: (1)

took it to bits and cleaned with carb cleaner, loadsof **** came out. took the car it out for a run and it sort of flutters. i tightened the screw down a touch and kept trying to tinker with it. what should it sound like ??

punto_gt

iTrader: (1)

i have stripped it totally, had the spring out and all piston,the bov now is like new, i just cant get it to dump, ive even tried the spring out of my baileys but nothing. has anybody got a blitz bov in the stoke area which i could possibly try on my car to see if it works ??? its doing my tree in now.