delta dash
14 November 2006, 11:41 PM
#3
Brunny
There's a thread in technical somewhere about using a VAG cable and free software for looking at codes / logging etc !!.....Jasonius was the last poster I think !!
Shaun
There's a thread in technical somewhere about using a VAG cable and free software for looking at codes / logging etc !!.....Jasonius was the last poster I think !!
Shaun
19 November 2006, 01:46 PM
#5
Scooby Regular
Thread Starter
Join Date: Sep 2004
Location: teesside
Posts: 142
Likes: 0
Received 0 Likes
on
0 Posts
thanks for the reply's sorry to be slow to reply back but had pc trouble just formatted pc to fix it, right downloaded the software from openecu, just wondering as i have the ESP Genesis software but this does not have knock correction on it, can i use the cable and OBD11 interface to run on the Ecuflash software does any one know if possible or not
19 November 2006, 01:57 PM
#7
Scooby Regular
Join Date: Aug 1999
Location: Isle of Sheppey, Kent - FSTi/TTR V6 DSG
Posts: 939
Likes: 0
Received 1 Like
on
1 Post
Originally Posted by brunny42
thanks for the reply's sorry to be slow to reply back but had pc trouble just formatted pc to fix it, right downloaded the software from openecu, just wondering as i have the ESP Genesis software but this does not have knock correction on it, can i use the cable and OBD11 interface to run on the Ecuflash software does any one know if possible or not
If you have the right cable, and the right software from OpenECU then yes, you can flash, though there are little if any stock maps available for Euro. All of the maps are from USDM cars....
What exactly are you trying to do?
Trending Topics
19 November 2006, 02:26 PM
#8
Scooby Regular
Thread Starter
Join Date: Sep 2004
Location: teesside
Posts: 142
Likes: 0
Received 0 Likes
on
0 Posts
i am just trying to check my knock levels as i have a funny running fault.
the esp software is one i got of scoobyworld
OBD2 Scantool Engine Diagnostic Scan tools
it is very basic but shows DTC.s can delete fault codes, does dyno runs, 1/4 mile times etc but quite basic doesnt show all i need
the esp software is one i got of scoobyworld
OBD2 Scantool Engine Diagnostic Scan tools
it is very basic but shows DTC.s can delete fault codes, does dyno runs, 1/4 mile times etc but quite basic doesnt show all i need
19 November 2006, 02:31 PM
#9
Scooby Regular
Join Date: Aug 1999
Location: Isle of Sheppey, Kent - FSTi/TTR V6 DSG
Posts: 939
Likes: 0
Received 1 Like
on
1 Post
Ahhhh, the Elmscan 5, OK know where you are now. So you bought this kit? I seem to remember the Elmscan works with all protocols (hence the price)....
19 November 2006, 02:37 PM
#10
Scooby Regular
Join Date: Aug 1999
Location: Isle of Sheppey, Kent - FSTi/TTR V6 DSG
Posts: 939
Likes: 0
Received 1 Like
on
1 Post
Vanagons with Subaru WRX Turbo Engines
I was going to have a play with this, though it will take some work to sort out the rom image to extract the fields....
This has been mentioned on the OpenECU site, though I am sure there is other software that will do the same.
Like I said, just got the cable myself, and at the moment got no car to plug it into to play..
Mark
I was going to have a play with this, though it will take some work to sort out the rom image to extract the fields....
This has been mentioned on the OpenECU site, though I am sure there is other software that will do the same.
Like I said, just got the cable myself, and at the moment got no car to plug it into to play..
Mark
19 November 2006, 02:37 PM
#11
Scooby Regular
Thread Starter
Join Date: Sep 2004
Location: teesside
Posts: 142
Likes: 0
Received 0 Likes
on
0 Posts
i bought mine a long time ago about 2 years back now, originally it was labelled esp advanced, i have had one upgrade labelled esp genesis, i will have to check if there is a further update which may cover more detail.
have you had much to do with it, i found my version to be basic but then again it is cheaply priced so i guess the saying is
you get what you pay for
have you had much to do with it, i found my version to be basic but then again it is cheaply priced so i guess the saying is
you get what you pay for
19 November 2006, 08:28 PM
#13
Scooby Regular
Thread Starter
Join Date: Sep 2004
Location: teesside
Posts: 142
Likes: 0
Received 0 Likes
on
0 Posts
i cant make head nor tail of it, its way too computer advanced for me, i get the idea its digital dash display to run on pc, but cant work out where to download or what tools cables etc are needed, maybe i am just over looking the obvious
19 November 2006, 09:01 PM
#14
Scooby Regular
Join Date: Aug 1999
Location: Isle of Sheppey, Kent - FSTi/TTR V6 DSG
Posts: 939
Likes: 0
Received 1 Like
on
1 Post
Yeah, took me a while! You have to me a member of OpenECU forum to download it....
Just found this as well...
Main Page - JDash
Just found this as well...
Main Page - JDash
19 November 2006, 10:06 PM
#15
Scooby Regular
Thread Starter
Join Date: Sep 2004
Location: teesside
Posts: 142
Likes: 0
Received 0 Likes
on
0 Posts
yes i have registered and sent pm to the lad whos doing the work, i will see what he says if/when he gets back to me, its a case of search and you shall find, i just dont fancy all these do it yourself things, all with funny pc language codes etc, i really dont understand the pc language codes hexadecimal stuff, its confusing if its not 1 to 10 i dont get it. lol
20 November 2006, 09:25 AM
#16
Scooby Regular
Join Date: Aug 1999
Location: Isle of Sheppey, Kent - FSTi/TTR V6 DSG
Posts: 939
Likes: 0
Received 1 Like
on
1 Post
Scoobyview seems to be simple enough. There are files for monitor, port and skin. You just need to edit them to what you want. I assume that your Elmscan will have installed itself on your PC as a virtual com port (it is USB?). So say its COM4, then edit the file and change it....
I will have a look at JDash later....
Like I said I am looking for the same thing too...
Mark
I will have a look at JDash later....
Like I said I am looking for the same thing too...
Mark
20 November 2006, 02:02 PM
#18
Scooby Regular
Join Date: Aug 1999
Location: Isle of Sheppey, Kent - FSTi/TTR V6 DSG
Posts: 939
Likes: 0
Received 1 Like
on
1 Post
Just extracted JDash. Run the config to get it into test mode, and change the skin to default gauges.....fire up jdash and see if this is good for you....
There is a logging skin and a gauge skin....looks pretty cool to me
There is a logging skin and a gauge skin....looks pretty cool to me
20 November 2006, 09:10 PM
#19
Scooby Regular
Thread Starter
Join Date: Sep 2004
Location: teesside
Posts: 142
Likes: 0
Received 0 Likes
on
0 Posts
now got the jdash and digi dash software downloaded, installed and running in test modes, will see if i can get them to link to the car with the cables i have, dont think i will manage it as probably got too many settings on pc to alter, i am no pc expert.
21 November 2006, 09:39 AM
#21
Scooby Regular
Join Date: Dec 2005
Posts: 294
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM
