Wheres the crank sensor? And how...
25 October 2006, 10:46 PM
#1
Scooby Regular
Thread Starter
iTrader: (3)
Join Date: May 2003
Posts: 875
Likes: 0
Received 0 Likes
on
0 Posts
Wheres the crank sensor? And how...
do I disconnect it to spin it over after an oil change? (is it a plug or wires?)
Just want to know if its easy to get to?
Thanks in advance.
jimmy
Just want to know if its easy to get to?
Thanks in advance.
jimmy
29 October 2006, 09:25 AM
#3
Scooby Regular
Join Date: Feb 2004
Location: READING
Posts: 194
Likes: 0
Received 0 Likes
on
0 Posts
crank sensor is located at the front top on the block, between alternator and aircon pump.
early ones you need to follow the wires back to a plug, newer ones the plug is on the sensor.
should be very easy to get to.
early ones you need to follow the wires back to a plug, newer ones the plug is on the sensor.
should be very easy to get to.
29 October 2006, 01:08 PM
#5
Scooby Regular
Join Date: Feb 2004
Location: READING
Posts: 194
Likes: 0
Received 0 Likes
on
0 Posts
when changing the oil in your beloved beast you MUST turn the engine over without it firing to get the oil pressure back up. then when you run it it will have pressure from the start. so if it is unplugs it wont start
One of the main cause of engine failiure is lack of oil pressure after a service! believe me ive seen a few!
One of the main cause of engine failiure is lack of oil pressure after a service! believe me ive seen a few!
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM