06 brembo's on a 99my turbo
#1
Scooby Regular
Thread Starter
Join Date: Jul 2005
Location: Stoke
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
06 brembo's on a 99my turbo
hi guys i guess there is a adaptor plate needed to fit them where or can anyone make any as i aint the foggiest where to get them from and i aint got a clue where to get them made thanx
#2
Scooby Regular
iTrader: (2)
If they are off an 06 then you need to either get a set of pre05 Disks or re-drill the 06 disks so that the wheel stud holes (PCD) are 5 x 100. They changed to 5 x 114 iafter 05, so these disk will not fit onto your hubs without doing the above.
For all other info refer to my other posts :
https://www.scoobynet.com/wheels-tyr...ront-rear.html
For all other info refer to my other posts :
https://www.scoobynet.com/wheels-tyr...ront-rear.html
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM