no1nutter

iTrader: (1)

have a clifford concept 300 alrm fitted on my car, need to find the control unit in order to retrieve the serial no. whereabouts is it likely 2 b installed on my classic?

TonyBurns

iTrader: (3)

You need to speak to your installer, if you dont have his number then find another clifford authorised dealer who will find it for you, and i recommend that you dont post things like this up here as it is open to the world and anyone can and probably do read it.

Tony

TimmyboyWRX

on my coop it was installed under the centre console beneath the radio and dials and in front of the gearstick. have a look here if there is enough room in the scoob, it may be here

silent running

Don't think it's giving too much away to say that it goes wherever there's room and you can get wiring access, which in practice means in the dash somewhere. There's plenty of room in there. IIRC it's not a very big unit, about the size of a hard disc drive if you know what one of them looks like.

Trackers on the other hand can go just about anywhere in the car.

TonyBurns

iTrader: (3)

The fact is you could be looking for ages, there are several places you can put them, and I know exactly where mine is but im not saying
You want to find it, either get a clifford engineer to plug in and show you the serial number on the clifford plug n play or the original paperwork has the serial number on..... now ill let you lot keep adding where you have yours hidden

Tony