Engine rebuild advice
16 September 2006, 05:34 PM
#1
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Mar 2006
Location: North Wales
Posts: 1,734
Likes: 0
Received 0 Likes
on
0 Posts
Engine rebuild advice
well as I am so skint my engine isnt getting sent off to be rebuilt...but ive got a few questions if anyone could help it would be great....
ok well here are a few probs to start with...
1. where can i buy uprated head gaskets from.
2. where can i get the heads checked, around/close to north wales or is there a way to check them myself to make sure there ok, i.e. things to look for.
3.are standard head bolts ok for say upto 400/400 hp
im sure ill have more questions soon...
ok well here are a few probs to start with...
1. where can i buy uprated head gaskets from.
2. where can i get the heads checked, around/close to north wales or is there a way to check them myself to make sure there ok, i.e. things to look for.
3.are standard head bolts ok for say upto 400/400 hp
im sure ill have more questions soon...
16 September 2006, 05:46 PM
#2
1) Try Mark @ Lateral performance, very helpful and get you exactly what you need.
2) Not really sure on that
3) They should be fine at that level but for piece of mind you could change them for ARP head bolts but personally i would not bother.
banny
2) Not really sure on that
3) They should be fine at that level but for piece of mind you could change them for ARP head bolts but personally i would not bother.
banny
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM