MS I PCB3.0V Fuel and Spark Control
#1
MS I PCB3.0V Fuel and Spark Control
what about this stand alone ECU????
All 'Basic Components'
PWM Flyback Damping Circuit components
Hall Sensor/Coil(-) and VR Sensor Ignition Trigger Components (jumpered for Hall sensor, optical sensor, points, or fuel only using negative coil input- you can reconfigure for any input you like)
IGBT High Current Ignition Driver Components
Current Limiting Circuit Components
All automotive temperature grade components for increased reliability
Supports use of original MS tach input, ignition coil triggering, VR, Hall and Optical sensor triggering
Direct Ignition coil driver
12x12 Volumetric Efficiency (VE) and Ignition Tables
Closed loop boost control
Rev limiters
Shift Light control
Water Injection control
Knock Sensor Input
Thanks in advance.
All 'Basic Components'
PWM Flyback Damping Circuit components
Hall Sensor/Coil(-) and VR Sensor Ignition Trigger Components (jumpered for Hall sensor, optical sensor, points, or fuel only using negative coil input- you can reconfigure for any input you like)
IGBT High Current Ignition Driver Components
Current Limiting Circuit Components
All automotive temperature grade components for increased reliability
Supports use of original MS tach input, ignition coil triggering, VR, Hall and Optical sensor triggering
Direct Ignition coil driver
12x12 Volumetric Efficiency (VE) and Ignition Tables
Closed loop boost control
Rev limiters
Shift Light control
Water Injection control
Knock Sensor Input
Thanks in advance.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM