Rear strut brace
Take out the back seats. Unclip the rear pillar plastic trim enough to pull the bottom out a bit. Remove the seatbelt mech. Undo the 3 nuts on the top of the strut. Fit one of the brace mounting brackets on top. Put the nuts back on hand tight. Do other side. Fit brace bar and tighten. Torque strut nuts down to 20nm/14.5 ft-lb. Refit seatbelts, ensure they work correctly and clip trim back on/fit seats.
Thread Starter
Scooby Regular
Joined: Dec 2003
Posts: 289
Likes: 0
From: Birmingham
Originally Posted by doug2507
Take out the back seats. Unclip the rear pillar plastic trim enough to pull the bottom out a bit. Remove the seatbelt mech. Undo the 3 nuts on the top of the strut. Fit one of the brace mounting brackets on top. Put the nuts back on hand tight. Do other side. Fit brace bar and tighten. Torque strut nuts down to 20nm/14.5 ft-lb. Refit seatbelts, ensure they work correctly and clip trim back on/fit seats.
wow bet to get my act together
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
Dec 28, 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
Nov 18, 2015 07:03 AM