indicators and hazards problem....
#1
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Aug 2005
Location: Manchester ish
Posts: 18,547
Likes: 0
Received 0 Likes
on
0 Posts
indicators and hazards problem....
Have a problem with my my92 wrx, When I use my indicators they will flash once or twice and then stop. This happens in either direction and also the same for the hazards.
I have done a search and everything I have found has said to check above the fuse box as there are 3 relays there. I have removed each one in turn, and tried the indicators and I still get the same symptoms with a click of a relay somewhere, so it isnt any of the 3 that I have found.
does anyone know where the relay is as I cannot see it anywhere.
Cheers for any help
I have done a search and everything I have found has said to check above the fuse box as there are 3 relays there. I have removed each one in turn, and tried the indicators and I still get the same symptoms with a click of a relay somewhere, so it isnt any of the 3 that I have found.
does anyone know where the relay is as I cannot see it anywhere.
Cheers for any help
Last edited by jaytc2003; 14 August 2006 at 10:37 AM.
#3
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Aug 2005
Location: Manchester ish
Posts: 18,547
Likes: 0
Received 0 Likes
on
0 Posts
managed to find the fault, the relay is behind the centre console and it is secured on a metal frame by a plastic clip. The wires were quite strained going into this relay, so undid it, reconnected the wires firmly and put it back upside down so that the wires are slack. Job done.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
38
17 July 2016 10:43 PM
Sam Witwicky
Engine Management and ECU Remapping
17
13 November 2015 10:49 AM