Fault code 21????
#1
Scooby Regular
Thread Starter
iTrader: (2)
Join Date: Jan 2005
Location: Wirral,Pensby
Posts: 2,010
Likes: 0
Received 0 Likes
on
0 Posts
Fault code 21????
95 WRX btw...
After doing a check on my car my Check Engine lamp seemed to be giving a code 21 fault..Is the light meant to stop at any point as i waited and it never stopped even after 6 minutes and just kept doing the same series of flashes.
On the saxonfields page were it tells you all about reseting the ECU etc it has a bar chart were it gives 3 codes and mine was doing the bottom code which says 21 next to it.Sort of blinks for a second twice then a quick blink at the end with a 1.8 second pause then does it again and again and again...
They say it's the Temp control sender..were is this??
I reset the ECU and the lamp now just blinks normally but my car still isn't on top form What affect can thios temp sender have?? My needle never rises above half way on the dial.
Any help appreciated!
Alan
After doing a check on my car my Check Engine lamp seemed to be giving a code 21 fault..Is the light meant to stop at any point as i waited and it never stopped even after 6 minutes and just kept doing the same series of flashes.
On the saxonfields page were it tells you all about reseting the ECU etc it has a bar chart were it gives 3 codes and mine was doing the bottom code which says 21 next to it.Sort of blinks for a second twice then a quick blink at the end with a 1.8 second pause then does it again and again and again...
They say it's the Temp control sender..were is this??
I reset the ECU and the lamp now just blinks normally but my car still isn't on top form What affect can thios temp sender have?? My needle never rises above half way on the dial.
Any help appreciated!
Alan
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM
Sam Witwicky
Engine Management and ECU Remapping
17
13 November 2015 10:49 AM