Hi
This is probably in the wrong section but im havin a bit of a mare with some clear indicators I have bought for my MY96 scoob.
These are the 2nd pair I have bought and both seem to have the wrong connectors on them to fit my original wiring.
My first thought was to use the original wiring and bulb holder and stick the orange bulb into it to use but the bulb is wrong fitment.
Can you get orange bulbs to fit the original bulb holders or is there another way to fit them
Sorry for sounding stupid but for some reason I cant seem to work out a simple problem

 

if its a big problem with the bulb holders, then crimp/solder together the cables from your existing wiring to the new indicator wiring, bin the plug! any chance you can post some pics, may be easier to help.

 

Ill get some pics taken tomorrow as you are right, it will help more as I cant describe it that well
Thanks for your help so far

 

speak to where you got them from for advice. I am sure you need to cut you existing connectors and mate it to the new connectors. Try the scoobyworld website and have a look at the lights on there, sure it mentions that you need to adapt your wiring to fit.

 

Just had a email from place I bought them and they say i need to cut and hardwire etc. I may be a bit naive thinkin it but is there any tranparent-ish orange paint that i can use on my bulbs so I dont need to cut any wires?
I just cant find any orange bulbs to fit my bulb holders anywhere