Installing a double din?
12 July 2006, 06:56 PM
#1
Scooby Regular
Thread Starter
Join Date: Dec 2005
Location: Carmarthen
Posts: 1,342
Likes: 0
Received 0 Likes
on
0 Posts
Installing a double din?
How easy is it to remove the oem stereo from an STI8 and to replace it with a Kenwood ddx7035 dvd ?
Any help would be very much appreciated
Any help would be very much appreciated
12 July 2006, 11:52 PM
#3
Scooby Regular
iTrader: (3)
Join Date: Jun 2005
Location: Surrounded by sheep, tidy.
Posts: 3,294
Likes: 0
Received 0 Likes
on
0 Posts
Easy....
Take out the drinks holder opening it then removing the screw, then pull the whole unit out (taken a bit of manipulation. Then ease out the 'silver' surround from the stereo, aircon controls, etc (start in the top right hand corner and work anti-clockwise). Then remove the 4 (or 6
) screws that hold the cage in place.
Job done.
Take out the drinks holder opening it then removing the screw, then pull the whole unit out (taken a bit of manipulation. Then ease out the 'silver' surround from the stereo, aircon controls, etc (start in the top right hand corner and work anti-clockwise). Then remove the 4 (or 6
) screws that hold the cage in place.Job done.
13 July 2006, 09:18 AM
#5
Scooby Regular
iTrader: (3)
Join Date: Jun 2005
Location: Surrounded by sheep, tidy.
Posts: 3,294
Likes: 0
Received 0 Likes
on
0 Posts
If in doubt, grab one of the guys on tonight if you're going, (Kev showed me how to do mine) - I'm not there unfortunately so won't be able to show you myself.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM