suburu
02 July 2006, 07:38 AM
#2
Scooby Regular
Use fine fishing line or strong nylon sewing thread to saw through the foam pad. Heat the bootlid with a hair dryer (or similar) or just face the sun at this time of year to soften the remaining adhesive and gently rub off the foam left with the pad of your fingertips. Any stubborn adhesive can be removed with WD40. Clean, polish and wax the bootlid.
Are you removing it 'cos it's spelt wrong
Are you removing it 'cos it's spelt wrong
02 July 2006, 10:56 AM
#3
Scooby Regular
Thread Starter
Join Date: Jan 2006
Location: ayrshire
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
lol
Originally Posted by corradoboy
Use fine fishing line or strong nylon sewing thread to saw through the foam pad. Heat the bootlid with a hair dryer (or similar) or just face the sun at this time of year to soften the remaining adhesive and gently rub off the foam left with the pad of your fingertips. Any stubborn adhesive can be removed with WD40. Clean, polish and wax the bootlid.
Are you removing it 'cos it's spelt wrong
Are you removing it 'cos it's spelt wrong
06 July 2006, 09:29 PM
#5
Scooby Newbie
Join Date: Jul 2006
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
your subaru badges, i need some!
Originally Posted by mur69
how do you get suburu lettering off boot lid without damage?/
cheers
cheers
