Standard oil pressure (bar)?
Thread Starter
Scooby Regular
iTrader: (3)
Joined: Jun 2005
Posts: 3,294
Likes: 0
From: Surrounded by sheep, tidy.
What are the 'normal' max and min oil pressure readings for a newage (bugeye) wrx?
If possible, max and min for cold start and warm running?
Thanks in advance.
If possible, max and min for cold start and warm running?
Thanks in advance.
Trap
Just had to go somewhere in my MY02 Bygeye WRX and driving around it's 6.6 bar, upper rev limit it's nudging 8 bar and hot idle about 3.2 bar.
I'd say between 3 and 8 bar then for most situations
Hope this helps
Shaun
PS measured by Defi
Just had to go somewhere in my MY02 Bygeye WRX and driving around it's 6.6 bar, upper rev limit it's nudging 8 bar and hot idle about 3.2 bar.
I'd say between 3 and 8 bar then for most situations

Hope this helps
Shaun
PS measured by Defi
Thread Starter
Scooby Regular
iTrader: (3)
Joined: Jun 2005
Posts: 3,294
Likes: 0
From: Surrounded by sheep, tidy.
Originally Posted by Midlife......
Trap
Just had to go somewhere in my MY02 Bygeye WRX and driving around it's 6.6 bar, upper rev limit it's nudging 8 bar and hot idle about 3.2 bar.
I'd say between 3 and 8 bar then for most situations
Hope this helps
Shaun
PS measured by Defi
Just had to go somewhere in my MY02 Bygeye WRX and driving around it's 6.6 bar, upper rev limit it's nudging 8 bar and hot idle about 3.2 bar.
I'd say between 3 and 8 bar then for most situations

Hope this helps
Shaun
PS measured by Defi

Nice to know it's running 'normal'
Thread Starter
Scooby Regular
iTrader: (3)
Joined: Jun 2005
Posts: 3,294
Likes: 0
From: Surrounded by sheep, tidy.
Originally Posted by kjdmk1
Rich , where did you get your sensors fitted? i've still not fitted mine yet

When I fitted the PSi3 a couple of months back I noticed the oil temp was 1 degree and the oil pressure was 6.5bar. Every time I've flicked through the different screens they've both always read the same so I assumed they were default values for cars without the sensors fitted. However the other day I noticed it read 6.6bar so I moved it to the page I normally have displayed and have found that it changes often and is obviously displaying the correct pressure (thanks midlife
I can only assume that the previous owner must've had gauges fitted and taken them out before selling.
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
Jan 11, 2021 03:08 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
38
Jul 17, 2016 10:43 PM




