Front bumper removal
#1
Scooby Regular
Thread Starter
Join Date: Aug 2001
Location: Stockport Cheshire Xbox Gamertag: Scooby WRX SMACS Member
Posts: 2,467
Likes: 0
Received 0 Likes
on
0 Posts
Front bumper removal
I'm having my bumper resprayed on the 14th and need to remove it, what I'm looking for is pointers to the removal where bolts, screws etc are any help would be great
Si
Si
#2
Scooby Senior
iTrader: (1)
Join Date: Nov 2000
Location: Wildberg, Germany/Reading, UK
Posts: 9,706
Likes: 0
Received 73 Likes
on
54 Posts
what model is it?
on my MY00 you need to take the grill off and the headlights out plus the wheel arch liners
There are 4 or 6 press clips on the top of the bumper 2 under each light you need to unscrew the centre plastic screw from each then you can pop the clips off, this is the same under the wheel arches holding the bumper to the wing, then there are 2 screws under where the fog light are roughly you need to take these out aswell, then the last screw is in the hole in the bumper which screws to the upright bar in front of the radiator. then it should come off.
if it is not any MY00 I have no idea how you do it.
HTH
Steve
on my MY00 you need to take the grill off and the headlights out plus the wheel arch liners
There are 4 or 6 press clips on the top of the bumper 2 under each light you need to unscrew the centre plastic screw from each then you can pop the clips off, this is the same under the wheel arches holding the bumper to the wing, then there are 2 screws under where the fog light are roughly you need to take these out aswell, then the last screw is in the hole in the bumper which screws to the upright bar in front of the radiator. then it should come off.
if it is not any MY00 I have no idea how you do it.
HTH
Steve
Last edited by Wurzel; 08 June 2006 at 02:10 PM.
#4
Scooby Regular
Just behind the head lights you will see two bolts that go down into the support rails, there are then some clips on the arch liners, and I think there are some under the grille.
#5
Scooby Regular
Join Date: Feb 2006
Location: swindon
Posts: 691
Likes: 0
Received 0 Likes
on
0 Posts
if you do a search for fmic fitting theres a thread there somwhere with step by step guide on bumper removal, i now you have got some bumper clips under the grill a screw behind the wheels and 2 big headed bolts underneath the car, i should remember realy only took mign off last week
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
Scott@ScoobySpares
Full Cars Breaking For Spares
55
05 August 2018 07:02 AM
Mattybr5@MB Developments
Full Cars Breaking For Spares
38
17 July 2016 10:43 PM
Scott@ScoobySpares
Full Cars Breaking For Spares
7
14 December 2015 08:16 AM
Mattybr5@MB Developments
Full Cars Breaking For Spares
20
22 October 2015 06:12 AM