Hi. I've had loads of help on here and am pleased to say that my cars now back on the road with a brand new engine and passed its mot today. The small problem i have is the central locking doesn't do anything now! I have a toad alarm installed and it unlocks and locks the drivers door but none of the others are doing anything.
I have checked all the fuses by the drivers footwell and there all fine. I have checked the alarm wires aren't stripped or anything but all seems fine. Can anyone shed any light on possible causes of this and ways to fix it.. Thanks.

 

Hi.

Had the same problem.

Look in the engine bay fuse box. You will see two large green fuses (30 amp). I cannot remember which does the central locking as both of mine had gone.

Now. You may look and think they are OK. Don't be fooled like I was. You have to look very carefully. Even take them out and give them a little shake!!

I hope this helps.

Cheers.

Mark.

 

Thanks for that, i'm going out to check it now. I'll let you know if it works. Appreciate the help Mark thanks.

 

Unforntunatly it isn't either of those fuses. I just used a circuit tester on them. Anyone have any other ideas. Its a 94 import (jdm) wrx.. Thanks in advance