What next?
#1
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Feb 2006
Posts: 638
Likes: 0
Received 0 Likes
on
0 Posts
What next?
Ive got a 99 sti and was wondering what would be the next best thing to get for more power. Aiming one day for about 400bhp but in stages
At the moment ive got a downpipe and exhaust, fmic, walbro fuel pump, and an apexi avcr.
Im getting a power fc but was wondering what after that?
Im thinking a tubular manifold and fuel pressure regulator.
Is the manifold the next most restrictive part?
Cheers
At the moment ive got a downpipe and exhaust, fmic, walbro fuel pump, and an apexi avcr.
Im getting a power fc but was wondering what after that?
Im thinking a tubular manifold and fuel pressure regulator.
Is the manifold the next most restrictive part?
Cheers
Last edited by wrxginge; 29 April 2006 at 01:08 PM.
#2
Scooby Regular
Join Date: Nov 2004
Location: In a V6 Mercedes
Posts: 2,327
Likes: 0
Received 0 Likes
on
0 Posts
A bigger turbo and injectors will be needed for the power your looking at.
Do you still have the 2.5" exhaust system, if so that will need to be changed
for a 3".
Hope you've got deep pockets
Rob
Do you still have the 2.5" exhaust system, if so that will need to be changed
for a 3".
Hope you've got deep pockets
Rob
#4
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Feb 2006
Posts: 638
Likes: 0
Received 0 Likes
on
0 Posts
lol yeah just short arms.
Would it be best to get a turbo before headers?
I know ill need them both in the end but didnt know what would make the biggest difference at the moment?
Cheers
Would it be best to get a turbo before headers?
I know ill need them both in the end but didnt know what would make the biggest difference at the moment?
Cheers
#6
Scooby Regular
Join Date: Nov 2004
Location: In a V6 Mercedes
Posts: 2,327
Likes: 0
Received 0 Likes
on
0 Posts
For sure the turbo would make the biggest difference.
Your best bet would be to have a chat with Andy Forrest, he's a wizard !!
www.andyforrestperformance.co.uk
Rob
Your best bet would be to have a chat with Andy Forrest, he's a wizard !!
www.andyforrestperformance.co.uk
Rob
#7
Scooby Regular
Join Date: Aug 2003
Location: Teesside
Posts: 1,247
Likes: 0
Received 0 Likes
on
0 Posts
I got some ported headers and up-pipe off Harvey and then a Power Fc off Andy F and got some advice from them saying that if I had the same mods as you've got, I've got everything same as you apart from the fmic but I've got a APS CAK and Fuel press reg, I have been advised that if I fitted a fmic TD05/06 turbo and injectors it should be pushing out around 450 don't qoute me on that though!! Have a word with Harvey the headers made a noticable difference even before the remap.
Hope this helps
Hope this helps