Replacing airbox hose for Samco - bit stuck!!
#1
Scooby Regular
Thread Starter
Replacing airbox hose for Samco - bit stuck!!
After pulling, squeezing and heaving! I finally got my orginal airbox hose off! I thought it would be a simple case of slotting the Samco hose in its place, then i noticed that something was plugged in to the bottom of the original hose!
As you can see theres a little hose on the left hand side, theres no hole in my Samco hose. So, is it a case of making a hole in the Samco? Also what is it for?!
As you can see theres a little hose on the left hand side, theres no hole in my Samco hose. So, is it a case of making a hole in the Samco? Also what is it for?!
#6
Scooby Regular
Join Date: Apr 2004
Location: Lincoln
Posts: 801
Likes: 0
Received 0 Likes
on
0 Posts
the cc comes out with 2 screws iirc.
join all the pipes together and vent to the chassis.
i've since fitted a samco pipe and removed the air pipe breather pipe completley, now only got 2 pipes venting to atmos.
join all the pipes together and vent to the chassis.
i've since fitted a samco pipe and removed the air pipe breather pipe completley, now only got 2 pipes venting to atmos.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
MH-Racing
Subaru Parts
18
18 October 2015 04:49 PM