I need to identify a resistor on the PCB of my link ecu
When driving along car just cuts out for a few seconds then cuts back in as if some one has switched it off then back on, after talking to Simon aka JGM
suggested i check all the earths and plugs in and to the ecu
So i took the ECU out removed the PCB and checked it over ,found a resistor on Pin no 2 136B is totally burnt to the point that i cant identify the value of the resistor
I am hoping this is the problem as it is the live to the PCB
Its marked R32 on the board and it for my97wrx
can any one help ,cars been off the road for 6 months only back on the road for 2 days so am a bit pi**sed off
Gary

 

Has any one got a 97/98 link ecu laying around that they could check a resistor colour code for me ,as i have a resistor in my ECU which has burnt out ,its R32 bottom right of picture between dip switchs and capacitor

http://i1.tinypic.com/sfgpwg.jpg

Thanks in advance
Gary

 

I'll see what I can find on mine tomorrow night (If I get time).
You should have called me tonight and I'd have done it then as it was still light!!!

 

I did supply a picture but you couldn't really see the what color it was, I'll be over tomorrow with ecu in hand

 

Checked mine this morning and call Gary, it's the same as yours Bryan

Will see what I can find on the Link forums