Are these injectors any good
#1
Are these injectors any good
http://cgi.ebay.co.uk/ws/eBayISAPI.d...MEWA%3AIT&rd=1
Are these Phase 1 or 2 injectors? and are they good quality injectors?
Banny
Are these Phase 1 or 2 injectors? and are they good quality injectors?
Banny
Trending Topics
#8
Subaru Tuning Specialist
Join Date: Jun 2002
Location: 7.74 @179 mph 1/4 mile - road legal
Posts: 6,654
Likes: 0
Received 1 Like
on
1 Post
Beware if they are the single pintle nozzle type. They are available as remanufactured units that appear (and are often sold as) new, cheap as chips from the USA.
I imported a set to try them, they ended up in the bin due to 20% flow differential across the set of 4, not to mention the poor atomisation from the single hole at low IDC which would have caused uneven idle.
Ideally you want the fine spray multi nozzle type, even better if they are flow matched, new injectors (even the good ones) can still vary by up to 7%
Andy
I imported a set to try them, they ended up in the bin due to 20% flow differential across the set of 4, not to mention the poor atomisation from the single hole at low IDC which would have caused uneven idle.
Ideally you want the fine spray multi nozzle type, even better if they are flow matched, new injectors (even the good ones) can still vary by up to 7%
Andy
Last edited by Andy.F; 12 March 2006 at 09:38 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
Scott@ScoobySpares
Full Cars Breaking For Spares
7
14 December 2015 08:16 AM