Has anybody some tips for me regarding the installation of an APEXI Avcr into my Classic ?
Really don't know where to start...

 

Nobody has an APexi boostcontroller in his car ?
I don't believe that !

 

for starters go and download the manual from ApexIusa.
google is your friend

 

its easy i did one a few months ago when you cut the wires to join the apexi give your self plenty to play with both ends, when looking at the book it shows you which plug and where the wire goes but its showing you them as if you are looking at them going in to the ecu (so you can see wires going in the back of the plug ) and just take you time count across make sure you have the right wire before you cut should take around 10 min good luck

 

Also it is a good idea to run the earth directly to the battery as scoobs can suffer with bad earths. I didnt and the unit wouldnt work (it would light up but noihing on the display), one quality piece of cable direct to earth sorted it out.