will
08 March 2006, 01:43 PM
#4
Former Sponsor
iTrader: (4)
Join Date: Jan 2001
Location: ECU Mapping - www.JollyGreenMonster.co.uk
Posts: 16,548
Likes: 0
Received 2 Likes
on
2 Posts
which part?
if as said you mean manifold then it will bolt on but the throttle position sensor is different and the original will not fit sti4 throttle body.
if you mean inlet pipe then no as sti4 passes under the inlet manifold, you have a 90degree bend on the turbo and the inlet pipe doesn't pass under the manifold.
What are you trying to achieve?
if as said you mean manifold then it will bolt on but the throttle position sensor is different and the original will not fit sti4 throttle body.
if you mean inlet pipe then no as sti4 passes under the inlet manifold, you have a 90degree bend on the turbo and the inlet pipe doesn't pass under the manifold.
What are you trying to achieve?
08 March 2006, 02:05 PM
#5
Scooby Regular
Thread Starter
Join Date: Jan 2005
Location: www.aroundthesouth.co.uk
Posts: 1,411
Likes: 0
Received 0 Likes
on
0 Posts
the red bit on top i have a td05 18g front entry but has a 90 degree samco on it looking at the red bit as will let me have a proper front entry this bit found pic
will it just bolt on or will it take loads of work
will it just bolt on or will it take loads of work
08 March 2006, 02:08 PM
#6
Former Sponsor
iTrader: (4)
Join Date: Jan 2001
Location: ECU Mapping - www.JollyGreenMonster.co.uk
Posts: 16,548
Likes: 0
Received 2 Likes
on
2 Posts
lot of work for little gain.. the only difference between sti and uk manifold of the same year is the red paint btw so a uk97/98 manifold might be cheaper with out the bumped up price for the red paint.
08 March 2006, 02:32 PM
#7
Scooby Regular
Thread Starter
Join Date: Jan 2005
Location: www.aroundthesouth.co.uk
Posts: 1,411
Likes: 0
Received 0 Likes
on
0 Posts
im looking at 2.5 bottom end so surley it would be better to have a cool air feeb looking to take a spot out and puy the filter near there