Notices
General Technical
Sponsored by:
Sponsored by: CARiD

WHAT BOOST PLZ HELP

Thread Tools
 
Search this Thread
 
Old Feb 15, 2006 | 10:05 PM
  #1  
DABALLS's Avatar
DABALLS
Thread Starter
Scooby Regular
 
Joined: Dec 2005
Posts: 73
Likes: 0
Default WHAT BOOST PLZ HELP

I HAVE A 93 WRX AND IVE JUST FITTED A AVC-R SOME1 ONE HAS SAID THE CAR SHOULD RUN 11.47PSI IS THIS RITE IF SO WHAT IS IT IN BAR THANKS FOR YOUR HELP
Reply
Old Feb 15, 2006 | 11:46 PM
  #2  
Jolly Green Monster's Avatar
Jolly Green Monster
Former Sponsor
iTrader: (4)
 
Joined: Jan 2001
Posts: 16,548
Likes: 2
From: ECU Mapping - www.JollyGreenMonster.co.uk
Default

11.47psi is 0.79bar.. the AVC-R measures in kg/cm2 which is very slightly different, but aiming for 0.8bar should be fine.

Simon

Last edited by Jolly Green Monster; Feb 15, 2006 at 11:49 PM.
Reply
Old Feb 16, 2006 | 05:33 AM
  #3  
94impreza's Avatar
94impreza
Scooby Regular
 
Joined: Nov 2005
Posts: 935
Likes: 0
From: On the Edge
Default

Hello,
Mine seems to read -0.5 bar on tickover and only goes as far as +0.5 bar when pushed.
Reply
Old Feb 16, 2006 | 09:15 PM
  #4  
DABALLS's Avatar
DABALLS
Thread Starter
Scooby Regular
 
Joined: Dec 2005
Posts: 73
Likes: 0
Default

Originally Posted by 94impreza
Hello,
Mine seems to read -0.5 bar on tickover and only goes as far as +0.5 bar when pushed.
did my sums and 0.8 bar seems about rite so ive set it to that, and it feels about rite to i would say +0.5 is way to low as that would only be about 7.2 psi think it needs winding up abit mate
Reply
Old Feb 17, 2006 | 09:20 AM
  #5  
94impreza's Avatar
94impreza
Scooby Regular
 
Joined: Nov 2005
Posts: 935
Likes: 0
From: On the Edge
Default

Thanks,
How do i go about winding it up ?
Reply
Old Feb 17, 2006 | 11:07 AM
  #6  
dbuxs's Avatar
dbuxs
Scooby Regular
 
Joined: Feb 2006
Posts: 196
Likes: 0
From: cork in ireland, hidding from the p!gs
Wink

clean out the boost solenoid valve this might help with the low boost and check your ecu for any errors,??
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
Nov 18, 2015 07:03 AM
psport
Subaru Parts
3
Oct 4, 2015 07:35 PM
Ganz1983
Subaru
5
Oct 2, 2015 09:22 AM
mistermexican
General Technical
2
Oct 1, 2015 04:30 PM
tjapplejuice
Drivetrain
9
Sep 25, 2015 03:46 PM




All times are GMT +1. The time now is 06:57 AM.