Sandwich plate remove filter - bugeye - help
#1
Scooby Regular
Thread Starter
Join Date: Sep 2005
Location: Cornwall
Posts: 208
Likes: 0
Received 0 Likes
on
0 Posts
Sandwich plate remove filter - bugeye - help
Hi,
I am purchasing gauges and have opted for the sandwich plate, so I need to remove then refit the filter, how easy is this and does it mean a full oil drain. Someone said I could just whip the filter off attach the plate, fill the filter with oil re-attach and top up the oil as required...
any advice much appreciated...
thank you
Rob
I am purchasing gauges and have opted for the sandwich plate, so I need to remove then refit the filter, how easy is this and does it mean a full oil drain. Someone said I could just whip the filter off attach the plate, fill the filter with oil re-attach and top up the oil as required...
any advice much appreciated...
thank you
Rob
#2
Scooby Regular
iTrader: (5)
Join Date: Feb 2003
Location: Worcester
Posts: 2,625
Likes: 0
Received 0 Likes
on
0 Posts
you won't need a full oil change as you can leave the sump plug in and remove the filter 2 litres would probably be over and above ( i can't remember, so wait for some one to confirm)
BUT why not wait and just change the oil and as some are saying they change the oil every 3k it won't do any harm
if you are going to wip of the filter make sure it is topped up to the brim with oil before you put it back on
Last edited by WRX_Rich; 14 February 2006 at 01:03 PM.
Thread
Thread Starter
Forum
Replies
Last Post