Help Clearing Engine Check Light
#1
Scooby Newbie
Thread Starter
Join Date: Feb 2003
Location: Shropshire
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
Help Clearing Engine Check Light
Hi Guys
Posted the following on an old thread in ScoobyNet General, but didn't get anywhere, perhaps someone in here can help me.
I have a de-cat up pipe, sports cat down pipe, decat middle section, wr sport bb & ecutek on a MY02 WRX.
A few weeks ago I got a 546 error code which I had cleared by my local dealer. A couple of days later the engine check light came on again, so I've now fitted a 2.2k resistor into the EGT socket as suggested on here, but engine check light is still on.
Do I need to get this cleared again by the dealer, or will it clear itself after a few miles?
Many thanks
Posted the following on an old thread in ScoobyNet General, but didn't get anywhere, perhaps someone in here can help me.
I have a de-cat up pipe, sports cat down pipe, decat middle section, wr sport bb & ecutek on a MY02 WRX.
A few weeks ago I got a 546 error code which I had cleared by my local dealer. A couple of days later the engine check light came on again, so I've now fitted a 2.2k resistor into the EGT socket as suggested on here, but engine check light is still on.
Do I need to get this cleared again by the dealer, or will it clear itself after a few miles?
Many thanks
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
20
22 October 2015 06:12 AM
TylerD529
Lighting and Other Electrical
5
20 September 2015 12:10 PM