Hi,

Please help as soon as poss!!!!!

Just started having a look at the fitting of my MBC on my MY96 STI. The cars outside with certain parts removed ready fo me to fit it!

Right - the elbow of the dawes goes to the wastegate. The pipe from the wasgate gets a screw in it to block it.

The other side of the Dawes goes to the turbo elbow nipple. This leaves the pipe from the elbow to the solenoid free. What do I do with this pipe that was attached to the turbo elbow??????

Fast responses appriciated!!!!!

Nick.

 

Blank it off m8

 

Try here
http://stefanostadal.homedns.org/car_mods_engine.htm

 

Brilliant!

Cheers Morpheus!

I had that link but I think that's a 2 port because it has the T piece, mine doesn't!

Thanks for you help!!!!

 

Right all done!

Set it to a low boost setting and I'm off to try it now, gently gently.

 

Well all set up after having to adjust it a few times! Better safe than sorry!!!!


I set it to 1 bar by my boost gauge and the fuel cut still happened! So it's now set at 0.9 bar and so far so good!

I thought the fuel cut was high enough for me to set max boost at 1.0bar????

Next step Scoobyecu or Apexi PFC!!!!