When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
my afr led meter is always it the red never moves up for some reason
fuel pump is pretty new a walbro tried a good second maf an still the same !!
No question - get i checked!
...however, if it never leave the read zone - you should get the afr meter calibrated. If you drive and maintain speed the afr led meter will make a light show quite often when the computer is ajusting the mixture. If you never se that the afr led meter is not correctly installed, does not have proper ground connection or need calibration.
If you have a presition power supply you could try to apply 0.95 volt to the afr led meter and it should read a little rich mixture.
If the afr meter is showing rich at 0.95 volt you could have a defect O2 sensor, but guess it is the one you have tried to switch - not the MAF sensor which is in your air intake.