MY01 Tuning Advice.
11 January 2006, 11:45 AM
#1
Scooby Regular
Thread Starter
Join Date: May 2004
Location: Elgin Area
Posts: 369
Likes: 0
Received 0 Likes
on
0 Posts
MY01 Tuning Advice.
Fellas,
Ive decided to go for the ecutek with remap from Andy forrest.
Can you lads recommend An air filter/induction kit
Also an exhaust system ? il take it right back to the turbo.
Am I likely to have the OBD light come on and stay on ? if so is there a way round that ?
cheers lads.
Ive decided to go for the ecutek with remap from Andy forrest.
Can you lads recommend An air filter/induction kit
Also an exhaust system ? il take it right back to the turbo.
Am I likely to have the OBD light come on and stay on ? if so is there a way round that ?
cheers lads.
11 January 2006, 12:09 PM
#2
Scooby Regular
iTrader: (7)
Join Date: Aug 2004
Location: west yorks
Posts: 2,365
Likes: 0
Received 0 Likes
on
0 Posts
No need for a induction kit, better to do a search but this is waht should come up, uprated panal filter.. Green , Sti , or JR, decat exhaust turbo back, when doing this u might do the up pipe too, if it ain't been done, wrx, the re-map should be able to put off any cells that come on...these are based on a wrx as I don't know if it's an sti u have well it would be very similar, wrx should manage about 270- 290 ish figures
11 January 2006, 01:51 PM
#3
Scooby Regular
iTrader: (3)
Join Date: Jun 2005
Location: Surrounded by sheep, tidy.
Posts: 3,294
Likes: 0
Received 0 Likes
on
0 Posts
I've got an MY01 WRX.
GREEN Cotton Panel Filter
Walbro 255 fuel pump
Magnex decat centre pipe
Magnex 6x4 oval backbox
Modified actuator "thing" (can't remember what the name of the little brass "thing" that enable them to exceed 1 bar)
264.8 bhp
258.4 lb/ft torque
GREEN Cotton Panel Filter
Walbro 255 fuel pump
Magnex decat centre pipe
Magnex 6x4 oval backbox
Modified actuator "thing" (can't remember what the name of the little brass "thing" that enable them to exceed 1 bar)
264.8 bhp
258.4 lb/ft torque
11 January 2006, 06:48 PM
#7
Scooby Newbie
Join Date: Jan 2006
Location: wallsend tyne & wear
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
hi there,52 sti,changed down pipe from turbo,panel k&n scorpion back box,goes and sounds mint,engine check light on permanent if it starts flashin ,time to worry.(pull over and stop)am lovin it,like
Trending Topics
11 January 2006, 06:55 PM
#8
Scooby Regular
Thread Starter
Join Date: May 2004
Location: Elgin Area
Posts: 369
Likes: 0
Received 0 Likes
on
0 Posts
LOL crazy geoff, you go easy mate, ive tuned everything ive ever owned, and you really need to get your ecu remapped buddy, or your at rick of running lean fuelling wise. Might be an idea bud
11 January 2006, 07:21 PM
#9
Scooby Regular
iTrader: (3)
Join Date: Jun 2005
Location: Surrounded by sheep, tidy.
Posts: 3,294
Likes: 0
Received 0 Likes
on
0 Posts
Bloody hell!!!
I 've just noticed that I forgot to add an "ecutek remap" to my list of mods - sorry if I've given the impression you'll get those figures by just changing a few parts...
You should definately get it remapped if you're taking out the cats and putting on a performance backbox.
DOH!
Should read:
ECUTEK remap
GREEN Cotton Panel Filter
Walbro 255 fuel pump
Magnex decat centre pipe
Magnex 6x4 oval backbox
Modified actuator "thing" (can't remember what the name of the little brass "thing" that enable them to exceed 1 bar)
I 've just noticed that I forgot to add an "ecutek remap" to my list of mods - sorry if I've given the impression you'll get those figures by just changing a few parts...
You should definately get it remapped if you're taking out the cats and putting on a performance backbox.
DOH!
Should read:
ECUTEK remap
GREEN Cotton Panel Filter
Walbro 255 fuel pump
Magnex decat centre pipe
Magnex 6x4 oval backbox
Modified actuator "thing" (can't remember what the name of the little brass "thing" that enable them to exceed 1 bar)
Thread
Thread Starter
Forum
Replies
Last Post
Uncle Creepy
Other Marques
43
27 December 2015 04:02 PM
spudboytim
Other Marques
10
26 September 2015 01:19 PM