KK3960

iTrader: (21)

Hi all after a few weeks research and a bit of my own dangerous knowledge ive decided to install an AVCR Boost Controller by myself. Pipework is sorted and its just the wiring im struggling with now. Due to the poor and outdated instructions which came with the unit I have managed to source 2 other sets of wiring diagrams from various sources for "supposed" connection to my year of car. Unfortunately all sets clash with regards to pin-out connections, however due to a process of elimination im 95% certain that im ok with the majority of the connections. The 5% issue im stuck on is the one colour for the cable for the RPM signal to the ECU. Apexi say that the OEM cable colour for this particular pin should be a green wire, but on this actual pin connection there is an Orange & White cable?? I obviously want to be 100% sure prior to any connection thats its correct!

Anybody have any ideas?? Or know where i can get hold of info on Subarus / Denso wiring loom colour coding to confirm the RPM signal colour wire.

Cheers

morpheous

iTrader: (9)

Yhm
2 ecu diags .. May help ?

KK3960

iTrader: (21)

Thanks Chris, yes ive got them. Much appreciated.