Hi all, this is my first time on the scoobynet forum, and my question is, can i just plug a ppp ecu straight into my00 uk turbo and drive off, or dose the car need setting up to run properly?

 

basically plug and play, althought there is a different size restrictor in one of te small boost pipes i believe, would need that, and the ppp also has samco hoses on the intercooler... and backbox...

 

I just plugged in and played, as you put it, PPP normally includes up rated pipe to intercooler which took me about 20 mins to change in the dark!!

Not sure what the previous post means about restrictor size though, would be interested in a reply.
Aggs

 

In the pipe thats runs from the impeller housing to the actuator, there is a brass 'ball' with a hole in it, the ppp apparently has a different size hole....

 

I run PPP on a MY99 was just plug and play, but to get the most out of it you will need a decat centre, good flowing back box, and uprated intercooling hoses, as the plastic one's had a tendency of splitting with increased boost.
Don't know about the restrictor size though.
John Banks would be able to anwser that one.
Boost runs about 1.1 Bar, with no over boosting or spiking.

Hope this helps