AVCR PIPE CONNECTIONS MY03 WRX
01 December 2005, 09:36 AM
#1
Scooby Regular
Thread Starter
iTrader: (21)
Join Date: Jul 2005
Location: North West
Posts: 1,236
Likes: 0
Received 0 Likes
on
0 Posts
AVCR PIPE CONNECTIONS MY03 WRX
Can someone tell me the easiest place to make the pipework connections for the AVCR on my newage and also the best place to mount the solenoid valve and pressure sensor!
Cheers
Cheers
01 December 2005, 11:18 AM
#2
Former Sponsor
iTrader: (4)
Join Date: Jan 2001
Location: ECU Mapping - www.JollyGreenMonster.co.uk
Posts: 16,548
Likes: 0
Received 2 Likes
on
2 Posts
Originally Posted by KK3960
Can someone tell me the easiest place to make the pipework connections for the AVCR on my newage and also the best place to mount the solenoid valve and pressure sensor!
Cheers
Cheers
mount the boost solenoid and map sensor on the drivers side inner wing.
Run the boost solenoid pipe from the COM connection to the wastegate solenoid.. (round cylinder on the top of the turbo) and the other boost solenoid pipe to the output nipple on the turbo. Should be obvious where they are having taken them off previously etc..
Use a T piece to connect the AVC-R MAP sensor into the original map sensor pipe.. the problem at this point it describing this sensor to you if you have no idea which one it is.. It looks similar to the AVC-R MAP sensor only it is square.
Simon
02 December 2005, 11:22 AM
#6
Former Sponsor
iTrader: (4)
Join Date: Jan 2001
Location: ECU Mapping - www.JollyGreenMonster.co.uk
Posts: 16,548
Likes: 0
Received 2 Likes
on
2 Posts
Originally Posted by AndrewC
Except that he has a new age so no external MAP sensor
okay so he need to find another take off from the manifold for the AVC-R MAP sensor then.
Simon
PS: Andrew , reply to your emails!
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
Scott@ScoobySpares
Full Cars Breaking For Spares
7
14 December 2015 08:16 AM