question about scoobyecu's
04 October 2005, 07:29 PM
#1
Scooby Regular
Thread Starter
Join Date: Jul 2002
Location: birmingham
Posts: 1,579
Likes: 0
Received 0 Likes
on
0 Posts
question about scoobyecu's
i have a pair of chips that have a little sticker on them that says
IMP-ECU-Z4 V6_16P5 S2
maybe 1 of the ecu guru's could tell me what map is on them
when i had them in my uk turbo it made a world of difference
steve
IMP-ECU-Z4 V6_16P5 S2
maybe 1 of the ecu guru's could tell me what map is on them
when i had them in my uk turbo it made a world of difference
steve
04 October 2005, 08:17 PM
#2
Scooby Regular
Join Date: Apr 2003
Location: Cambridgeshire
Posts: 1,541
Likes: 0
Received 0 Likes
on
0 Posts
It is possibly a variant of a scoobyecu with a boost target of ~15.5 - 16psig (1.06 - 1.1bar) with modified fuel/ignition/boost maps - can only be 100% clarified by reading the Eproms or finding who 'burn't' them 
Cheers
Cheers
06 October 2005, 09:58 AM
#3
Sounds like one of my labels, but can't be 100% sure.
I also know that there are some copies out there.....
If it's one of mine it will be a 16.5psi map based on a Z4 map.
Version 6 dates back to November 2002.
Version 1 was August 2002, so a V6 is quite an early one.....
I also know that there are some copies out there.....
If it's one of mine it will be a 16.5psi map based on a Z4 map.
Version 6 dates back to November 2002.
Version 1 was August 2002, so a V6 is quite an early one
.....
06 October 2005, 08:19 PM
#4
Scooby Regular
Thread Starter
Join Date: Jul 2002
Location: birmingham
Posts: 1,579
Likes: 0
Received 0 Likes
on
0 Posts
thx for that
you want me to take some pics of the chips to send you?
just need a board now to put them in
steve
you want me to take some pics of the chips to send you?
just need a board now to put them in
steve
Originally Posted by Scott.T
Sounds like one of my labels, but can't be 100% sure.
I also know that there are some copies out there.....
If it's one of mine it will be a 16.5psi map based on a Z4 map.
Version 6 dates back to November 2002.
Version 1 was August 2002, so a V6 is quite an early one.....
I also know that there are some copies out there.....
If it's one of mine it will be a 16.5psi map based on a Z4 map.
Version 6 dates back to November 2002.
Version 1 was August 2002, so a V6 is quite an early one
.....
06 October 2005, 10:05 PM
#5
Scooby Regular
Join Date: Sep 2005
Location: R.I.P Richard Burns
Posts: 191
Likes: 0
Received 0 Likes
on
0 Posts
Is it a single or a pair of chips? If it is a single, solder a holder into any Z4 ECU and you don't need the adaptor board.
Check it is a 27C1028 labelled chip. If it is the 512 you need the 'Scooby ECU' type board.
Check it is a 27C1028 labelled chip. If it is the 512 you need the 'Scooby ECU' type board.
Thread
Thread Starter
Forum
Replies
Last Post
Brzoza
Engine Management and ECU Remapping
1
02 October 2015 05:26 PM