Starting to Miss ?? 95 Wrx Std (ish)
#1
Scooby Regular
Thread Starter
Join Date: Dec 2004
Location: Kendal, North west
Posts: 119
Likes: 0
Received 0 Likes
on
0 Posts
Starting to Miss ?? 95 Wrx Std (ish)
where is best place to start looking, started to devolpe a miss at 3.5k onwards, SPARKS,, COILS ??? any where else i should start looking ?
#3
Scooby Regular
Thread Starter
Join Date: Dec 2004
Location: Kendal, North west
Posts: 119
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by DaveW
Spark plugs and coils is a good place to start, it will probably be one or the other.
answers on a postcard,, ????
#4
Scooby Regular
Join Date: May 2002
Location: Taunton
Posts: 1,178
Likes: 0
Received 0 Likes
on
0 Posts
You need to remove airbox and resonator, as well as screen wash container, then its not so hard.
You need a rachet set with a sparkplug socket and small extension.
You need a rachet set with a sparkplug socket and small extension.
#5
Scooby Regular
Join Date: Sep 2003
Location: Nottingham during week, Leeds at Weekends and 5ive-o.org at night
Posts: 356
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Roojai
You need to remove airbox and resonator, as well as screen wash container, then its not so hard.
You need a rachet set with a sparkplug socket and small extension.
You need a rachet set with a sparkplug socket and small extension.
Use 1/4" ratchet and / or a spanner for the coil packs and 1/2" ratchet with a 2" extension and plug socket for the plugs.
The plugs on mine were OK, but the 2 hardest coil packs to get to (on passenger side) had gone.
Once you have suffered once the next time is easy, honest :-)
Last edited by Rally; 03 October 2005 at 10:58 PM.
#6
Scooby Regular
Join Date: May 2002
Location: Taunton
Posts: 1,178
Likes: 0
Received 0 Likes
on
0 Posts
[QUOTE=Rally]Airbox removal is a must, I can do with out removing screen wash or anything else though. Does involve lying on floor for the 2 plugs on passenger side.
QUOTE]
Screen wash removal is two bolts and done in 30 secs, well worth it to not have to go from bottom.
Best thing for the coils is a ratchet spanner (technical terms...not), I think its a 14mm, could be 12.
Its not hard but can take a while, I think about 1 hour to take them all out and replace.
QUOTE]
Screen wash removal is two bolts and done in 30 secs, well worth it to not have to go from bottom.
Best thing for the coils is a ratchet spanner (technical terms...not), I think its a 14mm, could be 12.
Its not hard but can take a while, I think about 1 hour to take them all out and replace.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
20
22 October 2015 06:12 AM
TylerD529
Lighting and Other Electrical
5
20 September 2015 12:10 PM