overlord

Hi all
I just replaced my maf cos i have got code 23 and the car is not running propely but it seems not to have done anything. Could someone please remind me how to reset the ecu cos im not sure im doing it properly or could there be some other reson im still getting code 23 and its running rough?
cheers

Russell

ticky

You should find it here

http://www.saxonfields.freeserve.co.uk/

or just disconnect the battery? (Im thinking its a classic model)

overlord

ko so I reconected the battery after leaving it over night and checked the error codes befor starting the engine and got no codes so I started the engine and it was running rough so i checked the codes again and got code 23 again. What is the most likely cause have i replaced the old broken maf with a new broken maf or could it be some thing else?
cheers

Russell

ticky

Have you check the connector or the wiring (maf end)
Or you could try someone local with same year scooby to do a quick swap around to make sure its not the new maf thats faulty.

Were are you based & what model year is it?

Ticky