Need a little help with ebc settings
#1
Scooby Regular
Thread Starter
Join Date: Nov 2004
Location: Leeds
Posts: 230
Likes: 0
Received 0 Likes
on
0 Posts
Need a little help with ebc settings
Hi all, ive had a greddy profec-b spec II fitted for a few months now and still havent managed to figure out what exactly the start boost/setgain setting does. Ive got my boost set to where i want it using the setpoint and gain settings and i have nice stable boost with no spikes. Apparently the startboost/setgain controls how the turbo spools up but I cant quite get my head round it, can someone explain in simple terms how this setting effects how the turbo kicks in. Thanks
Last edited by fallwood; 11 September 2005 at 06:41 PM.
#2
Scooby Regular
Thread Starter
Join Date: Nov 2004
Location: Leeds
Posts: 230
Likes: 0
Received 0 Likes
on
0 Posts
Just found this on another forum , maybe it can help someone explain how the setting works.
START BOOST (also known as SET GAIN because that is what is displayed on the unit when adjusting this setting) is the lowest boost that the Greddy unit will begin increasing the boost from under WOT. You want this to be as close to the SET value as possible, since you want to keep as close to your desired boost as possible. However, setting it too close to the SET value will cause the boost to spike.
START BOOST (also known as SET GAIN because that is what is displayed on the unit when adjusting this setting) is the lowest boost that the Greddy unit will begin increasing the boost from under WOT. You want this to be as close to the SET value as possible, since you want to keep as close to your desired boost as possible. However, setting it too close to the SET value will cause the boost to spike.
#3
Scooby Regular
Thread Starter
Join Date: Nov 2004
Location: Leeds
Posts: 230
Likes: 0
Received 0 Likes
on
0 Posts
Is there no one at all using one of these boost controllers, if not does anyone have any suggestions who I could contact about it (tried greddy they are not very helpfull).
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM