turbo pressure
#1
turbo pressure
Hi whats the highest safe boost you can run on a uk 98 turbo.
Have got uprated fuel pump,fcd,fmic,induction kit,uprated plugs and leads,greddy e manage,greddy eo1 boost controler, prodrive back box, magnex center section+de cat downpipe and up pipe.
can set hi and low boost as well as 10 sec overboost.
Have got it at lo 0.8bar hi 1.0 bar and overboost 1.1 bar. Before that went in car was running up to 1.2bar then dropping down to 0.8 thats the way prodrive set it
Have got uprated fuel pump,fcd,fmic,induction kit,uprated plugs and leads,greddy e manage,greddy eo1 boost controler, prodrive back box, magnex center section+de cat downpipe and up pipe.
can set hi and low boost as well as 10 sec overboost.
Have got it at lo 0.8bar hi 1.0 bar and overboost 1.1 bar. Before that went in car was running up to 1.2bar then dropping down to 0.8 thats the way prodrive set it
#2
Scooby Regular
iTrader: (9)
You dont want to be running more than 1.2bar on the td04.
I too run my98 have had no probs around 1.1-1.18bar depending on the temp of air - then fuel cut.
I too run my98 have had no probs around 1.1-1.18bar depending on the temp of air - then fuel cut.
Originally Posted by 98prodrivewrs
Hi whats the highest safe boost you can run on a uk 98 turbo.
Have got uprated fuel pump,fcd,fmic,induction kit,uprated plugs and leads,greddy e manage,greddy eo1 boost controler, prodrive back box, magnex center section+de cat downpipe and up pipe.
can set hi and low boost as well as 10 sec overboost.
Have got it at lo 0.8bar hi 1.0 bar and overboost 1.1 bar. Before that went in car was running up to 1.2bar then dropping down to 0.8 thats the way prodrive set it
Have got uprated fuel pump,fcd,fmic,induction kit,uprated plugs and leads,greddy e manage,greddy eo1 boost controler, prodrive back box, magnex center section+de cat downpipe and up pipe.
can set hi and low boost as well as 10 sec overboost.
Have got it at lo 0.8bar hi 1.0 bar and overboost 1.1 bar. Before that went in car was running up to 1.2bar then dropping down to 0.8 thats the way prodrive set it
#3
Originally Posted by morpheous
You dont want to be running more than 1.2bar on the td04.
I too run my98 have had no probs around 1.1-1.18bar depending on the temp of air - then fuel cut.
I too run my98 have had no probs around 1.1-1.18bar depending on the temp of air - then fuel cut.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM