Help with TD05 FE Conversion
15 March 2005, 09:24 AM
#1
Scooby Regular
Thread Starter
iTrader: (3)
Join Date: Mar 2004
Location: N.Ireland
Posts: 4,088
Likes: 0
Received 0 Likes
on
0 Posts
Help with TD05 FE Conversion
I have a 1995 WRX and am wanting to convert my car to a TD05FE.
I have the following upgrades already on the car:
Blitz Iridium Plugs
HKS Superflow Induction kit
HKS Front Mounted Intercooler
Blitz Dump Valve
Walbro 255 lt/hr fuel pump
Apexi Full Stainless System from turbo back
Apexi AVCR Boost Controller
VOS Chip
I have purchased the following for the conversion:
FSE Uprated Fuel Pressure Regulator
TD05 FE Turbo
440cc Injectors
Uprated Fuel Rail converted for screw in -6 thread
STI 4 Red top Inlet Manifold
Can anyone give me any ideas on this conversion, ie fuel pressure needed to run 1.5 bar and what else i need to buy ie gaskets etc as dont wanna be stuck with car not running.
Hope to change the VOS Chip to an Apexi Power FC in next few weeks and a set of 550cc Injectors as dont trust running chips with high boost.
What bhp could i expect from this mod roughly?
I have the following upgrades already on the car:
Blitz Iridium Plugs
HKS Superflow Induction kit
HKS Front Mounted Intercooler
Blitz Dump Valve
Walbro 255 lt/hr fuel pump
Apexi Full Stainless System from turbo back
Apexi AVCR Boost Controller
VOS Chip
I have purchased the following for the conversion:
FSE Uprated Fuel Pressure Regulator
TD05 FE Turbo
440cc Injectors
Uprated Fuel Rail converted for screw in -6 thread
STI 4 Red top Inlet Manifold
Can anyone give me any ideas on this conversion, ie fuel pressure needed to run 1.5 bar and what else i need to buy ie gaskets etc as dont wanna be stuck with car not running.
Hope to change the VOS Chip to an Apexi Power FC in next few weeks and a set of 550cc Injectors as dont trust running chips with high boost.
What bhp could i expect from this mod roughly?
15 March 2005, 10:09 AM
#2
Scooby Regular
Join Date: Aug 2004
Posts: 274
Likes: 0
Received 0 Likes
on
0 Posts
What exhaust set up?
At a guess i would say a reliable 300-320.
take look at Carl Davey's thread.
http://bbs.scoobynet.co.uk/showthread.php?t=373504
He's running a similar set up.
At a guess i would say a reliable 300-320.
take look at Carl Davey's thread.
http://bbs.scoobynet.co.uk/showthread.php?t=373504
He's running a similar set up.
Last edited by heple1983; 15 March 2005 at 10:14 AM.
Thread
Thread Starter
Forum
Replies
Last Post