ClintUK

Have just replaced my clutch (thanks to Dad for help and equipment) 97 UK Turbo

Reading up beforehand it seems it's possible to do this by dropping the centre section of the exhaust. If this is so how do you get the drivers side drive splines from the front diff past the cat heatshield mounting bracket
I cut the bracket and welded it back on

I can let everyone know however it is possible to drop the box without removing any part of the exhaust. The heat shielding needs to come off and it is tight, but it will come out

Thanks to everyone who posted help on this job, very useful.

Anyone attempting for the 1st time - good luck, took me a weekend. (Including 160mile round trip as the wrong parts were delivered )