STI5300

iTrader: (4)

As the title says I want to know what is the maximum negative camber that can be obtained using the standard ecentric bolts on the classic front suspension.

Thanks

Andrew

Mark A

iTrader: (1)

? standard ecentric bolts

I think you need ecentric bolts (1.5 degrees may be a bit more) to start with, I thought the standard were 0

stockcar

depends on wether std ride height or not......................about 1deg normally on a std car (a bit more if your lucky), and around 1.5deg on a lowered set-up..............

p.s. you only have camber bolts as std on the front legs, the rears are fixed.........
hope this helps
alyn

STI5300

iTrader: (4)

Thanks for the info. guys I know the back are fixed, but I use the car for sprinting and wanted to know the max. before having the geometry set, off to buy some Whiteline bolts to get a bit more camber.

Aztec Performance Ltd

iTrader: (234)

I got one and a hald degrees on my lowered setup on stock front camber bolts.

If you want more or want to do the rears also the camber adjust bolts cost £25 per set from camskill.

Bob