TD05 Turbos
#1
Former Sponsor
Thread Starter
iTrader: (4)
Join Date: Jul 2003
Location: @Junc 12, M40 Warwicksh; 01926 614522 CV33 9PL -Use 9GX for Satnav. South Mids Alcatek ECu dealer
Posts: 6,377
Likes: 0
Received 3 Likes
on
3 Posts
TD05 Turbos
Just had another caller !!
When you guys buy TD05 turbos from anywhere PLEASE ensure that you get the water pipes and banjo bolts. TD05 pipes and bolts are different to all other Subaru turbos and only TD05 will fit.
We don't have any, but would be millionaires overnight if we did.
Make sure before you buy a TD05 that it is COMPLETE with pipes and banjos.
David APi Engines / APi Impreza
When you guys buy TD05 turbos from anywhere PLEASE ensure that you get the water pipes and banjo bolts. TD05 pipes and bolts are different to all other Subaru turbos and only TD05 will fit.
We don't have any, but would be millionaires overnight if we did.
Make sure before you buy a TD05 that it is COMPLETE with pipes and banjos.
David APi Engines / APi Impreza
#3
Originally Posted by APIDavid
Just had another caller !!
When you guys buy TD05 turbos from anywhere PLEASE ensure that you get the water pipes and banjo bolts. TD05 pipes and bolts are different to all other Subaru turbos and only TD05 will fit.
We don't have any, but would be millionaires overnight if we did.
Make sure before you buy a TD05 that it is COMPLETE with pipes and banjos.
David APi Engines / APi Impreza
When you guys buy TD05 turbos from anywhere PLEASE ensure that you get the water pipes and banjo bolts. TD05 pipes and bolts are different to all other Subaru turbos and only TD05 will fit.
We don't have any, but would be millionaires overnight if we did.
Make sure before you buy a TD05 that it is COMPLETE with pipes and banjos.
David APi Engines / APi Impreza
Thanks Phill
#4
Scooby Regular
Join Date: May 1999
Location: SSO2003 2nd, SSO2005 1st, SSO2006 2nd, TACC Rd4 5th 4wd: In my car ;-)
Posts: 2,637
Likes: 0
Received 0 Likes
on
0 Posts
Don't suppose you'd have a picture of what the pipes and banjo bolts look like mate?
Mark.
#5
Former Sponsor
Thread Starter
iTrader: (4)
Join Date: Jul 2003
Location: @Junc 12, M40 Warwicksh; 01926 614522 CV33 9PL -Use 9GX for Satnav. South Mids Alcatek ECu dealer
Posts: 6,377
Likes: 0
Received 3 Likes
on
3 Posts
Originally Posted by R19KET
I think the clue is in the post
Mark.
Mark.
Conrad it is supposed to be in BOLD just so it gets noticed.
David APi
#7
In order to avoid Mr Angry, buy a new one with all the bits ...
http://www.boostplanet.com/product2.htm
Would now be a good time to ring up and ask you to deliver a coffee ?
http://www.boostplanet.com/product2.htm
Would now be a good time to ring up and ask you to deliver a coffee ?
Trending Topics
#8
Former Sponsor
Thread Starter
iTrader: (4)
Join Date: Jul 2003
Location: @Junc 12, M40 Warwicksh; 01926 614522 CV33 9PL -Use 9GX for Satnav. South Mids Alcatek ECu dealer
Posts: 6,377
Likes: 0
Received 3 Likes
on
3 Posts
Originally Posted by Gidney&Knowlesy
BTT for Mr Angry.........
David I've just bought a TD05 & I don't suppose...........
David I've just bought a TD05 & I don't suppose...........
LOL
David APi
#11
Scooby Regular
Join Date: Jun 2003
Location: Founder of surreyscoobies.co.uk
Posts: 2,889
Likes: 0
Received 0 Likes
on
0 Posts
I would just like to take this opportunity to thank your company David for supplying me with a VF series banjo bolt 2 weeks ago.
Helped me out no end, cheers
Andy
Helped me out no end, cheers
Andy
#12
Scooby Regular
Join Date: Feb 2003
Location: Zed Ess Won Hay Tee
Posts: 21,611
Likes: 0
Received 0 Likes
on
0 Posts
are the bolts a diffrent size??
i had my vf22 banjo and im sure i cut the centre bit that joins the 2 and managed to fit it onto a td04 (was a long time ago mind)
i had my vf22 banjo and im sure i cut the centre bit that joins the 2 and managed to fit it onto a td04 (was a long time ago mind)
#14
Originally Posted by APIDavid
Smart guy; Mark, Someone who READS the posts.
Conrad it is supposed to be in BOLD just so it gets noticed.
David APi
Conrad it is supposed to be in BOLD just so it gets noticed.
David APi
Are you tired by any chance???? I was asking a simple question from a simple persons point of view (me) I sorry to insult your intelligence by not knowing what the **** you anoraks are on about!!!
I have a TD05 in the garage and was going to see if I had the banjo or whatever they are called bolts, and the water pipes. But thanks for nothing mate.
Next time, I'm not bother trying to educate my tiny mind and take it along to a main dealer and pay £60 per hour, only for them to discover I got bit missing
Thanks (for chuff all) Phill
#16
Originally Posted by Mark A
I hope you are joking Phill, I can't tell from your post!
Thanks Phill
#18
Scooby Regular
Join Date: Feb 2003
Location: Zed Ess Won Hay Tee
Posts: 21,611
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by babber
David,
Are you tired by any chance???? I was asking a simple question from a simple persons point of view (me) I sorry to insult your intelligence by not knowing what the **** you anoraks are on about!!!
I have a TD05 in the garage and was going to see if I had the banjo or whatever they are called bolts, and the water pipes. But thanks for nothing mate.
Next time, I'm not bother trying to educate my tiny mind and take it along to a main dealer and pay £60 per hour, only for them to discover I got bit missing
Thanks (for chuff all) Phill
Are you tired by any chance???? I was asking a simple question from a simple persons point of view (me) I sorry to insult your intelligence by not knowing what the **** you anoraks are on about!!!
I have a TD05 in the garage and was going to see if I had the banjo or whatever they are called bolts, and the water pipes. But thanks for nothing mate.
Next time, I'm not bother trying to educate my tiny mind and take it along to a main dealer and pay £60 per hour, only for them to discover I got bit missing
Thanks (for chuff all) Phill
#20
Scooby Regular
Join Date: Jun 2003
Location: Founder of surreyscoobies.co.uk
Posts: 2,889
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ScoobyDuck
isnt that an oil bolt on the left tho ?
its all too confusing.... AGGGGGGGHHHHHHHHHHHHHHHHH
its all too confusing.... AGGGGGGGHHHHHHHHHHHHHHHHH
AP
#21
Thanks for the pics Andy, I'm still unsure as to whether I need to change the bolt on mine or not, It was probably my call to A.P.I. that started this thread, they didn't have one as you can probably see !
After putting the question to Any.F when I first changed turbos, he replied that if you are changing from a TD to an IHI, you will definately need to change this bolt, however it is not required if the other way round, i.e. IHI to TD05 !
I just don't want to take any chances for the sake of a bolt (if I can get one)
Oh and Roojai, YHPM.
After putting the question to Any.F when I first changed turbos, he replied that if you are changing from a TD to an IHI, you will definately need to change this bolt, however it is not required if the other way round, i.e. IHI to TD05 !
I just don't want to take any chances for the sake of a bolt (if I can get one)
Oh and Roojai, YHPM.
Last edited by smiff99; 23 February 2005 at 10:04 AM.
#23
Subaru Tuning Specialist
Join Date: Jun 2002
Location: 7.74 @179 mph 1/4 mile - road legal
Posts: 6,654
Likes: 0
Received 1 Like
on
1 Post
No. I have run my own TD05-20G at up to 1.8bar / 440 bhp on the restricted IHI oil banjo without any issues.
There are a number of different orifice sizes on banjos fitted throughout the years, this applies to both the head and turbo end of the oil feed line.
Fitting the open (head end) banjo to a roller/ball bearing IHI can cause it to spool slightly slower but you would be hard pushed to notice the difference.
Andy
ps I realise this thread started off referring to water pipes, not oil pipes ! and NO I DON'T HAVE ANY SPARE ONES EITHER
There are a number of different orifice sizes on banjos fitted throughout the years, this applies to both the head and turbo end of the oil feed line.
Fitting the open (head end) banjo to a roller/ball bearing IHI can cause it to spool slightly slower but you would be hard pushed to notice the difference.
Andy
ps I realise this thread started off referring to water pipes, not oil pipes ! and NO I DON'T HAVE ANY SPARE ONES EITHER
#25
Originally Posted by Roojai
I've got a couple of spare td05 banjo bolts if anyone wants them...
Thanks Phill
#26
Former Sponsor
Thread Starter
iTrader: (4)
Join Date: Jul 2003
Location: @Junc 12, M40 Warwicksh; 01926 614522 CV33 9PL -Use 9GX for Satnav. South Mids Alcatek ECu dealer
Posts: 6,377
Likes: 0
Received 3 Likes
on
3 Posts
Originally Posted by StickyMicky
still waiting for mr angrys reply myself
However it is difficult to supply a picture of something you haven't got......
I was originally trying to save phone calls from a number of people who call here regularly for something that is hard to get hold of. The point was that you should make sure you get the water pipes and banjos when you buy the turbo rather than frantically try after it's too late.
They are hard to come by and perhaps l'll try to get API Japan to buy some as something we should keep anyway.
No offence meant from here - just perhaps the humour missed.
Good luck all David APi Engines / APi Impreza
#27
Originally Posted by APIDavid
Sorry guys - Not angry at all - thats just Knowlesey's sense of humour.
Good luck all David APi Engines / APi Impreza
Good luck all David APi Engines / APi Impreza
I honestly haven't got a clue what I'm supposed to be look for, to fit on my TD05, but do have the complete engine as well, so'd be lovely if I knew what the parts looked like. Does anyone have pictures, to help me identify the rocking horse **** parts
Surely you could get a few specials made up, so you can earn your way to the first million.
Phill
PS David, after your reply in this thread, I'd be very sceptical using you company, although I've heard a lot on good things about you. Why did you get so stroppy?
#28
Scooby Regular
iTrader: (1)
Join Date: Mar 2002
Location: North East Subaru Forum
Posts: 3,920
Likes: 0
Received 0 Likes
on
0 Posts
you can buy the water pipes and bolts from subaru but they are over £100.
if a turbo you are buying doesn't have the water pipes make sure the price reflects this.
David, make sure mark supplies them with the water pipes next time
if a turbo you are buying doesn't have the water pipes make sure the price reflects this.
David, make sure mark supplies them with the water pipes next time
#29
Former Sponsor
Thread Starter
iTrader: (4)
Join Date: Jul 2003
Location: @Junc 12, M40 Warwicksh; 01926 614522 CV33 9PL -Use 9GX for Satnav. South Mids Alcatek ECu dealer
Posts: 6,377
Likes: 0
Received 3 Likes
on
3 Posts
[QUOTE=babber]Well you'd need a sense of humour living in Knowlesey mate, wouldn't you?
I honestly haven't got a clue what I'm supposed to be look for, to fit on my TD05, but do have the complete engine as well, so'd be lovely if I knew what the parts looked like. Does anyone have pictures, to help me identify the rocking horse **** parts
Surely you could get a few specials made up, so you can earn your way to the first million.
Phill
PS David, after your reply in this thread, I'd be very sceptical using you company, although I've heard a lot on good things about you. Why did you get so stroppy?[/QUOTE]
Phill, Not stroppy at all, just a humour thing that seems to have missed the mark. ANYBODY on here who has met me or been here will tell you I'm the calmest guy around. Sorry if I've put you off, it wasn't meant like that at all.
David
I honestly haven't got a clue what I'm supposed to be look for, to fit on my TD05, but do have the complete engine as well, so'd be lovely if I knew what the parts looked like. Does anyone have pictures, to help me identify the rocking horse **** parts
Surely you could get a few specials made up, so you can earn your way to the first million.
Phill
PS David, after your reply in this thread, I'd be very sceptical using you company, although I've heard a lot on good things about you. Why did you get so stroppy?[/QUOTE]
Phill, Not stroppy at all, just a humour thing that seems to have missed the mark. ANYBODY on here who has met me or been here will tell you I'm the calmest guy around. Sorry if I've put you off, it wasn't meant like that at all.
David
#30
Former Sponsor
Thread Starter
iTrader: (4)
Join Date: Jul 2003
Location: @Junc 12, M40 Warwicksh; 01926 614522 CV33 9PL -Use 9GX for Satnav. South Mids Alcatek ECu dealer
Posts: 6,377
Likes: 0
Received 3 Likes
on
3 Posts
Originally Posted by jonny gav
you can buy the water pipes and bolts from subaru but they are over £100.
if a turbo you are buying doesn't have the water pipes make sure the price reflects this.
David, make sure mark supplies them with the water pipes next time
if a turbo you are buying doesn't have the water pipes make sure the price reflects this.
David, make sure mark supplies them with the water pipes next time
David APi