Drivers side Indicator?
#1
Scooby Regular
Thread Starter
Join Date: Jan 2005
Location: Stoke on Trent
Posts: 436
Likes: 0
Received 0 Likes
on
0 Posts
Drivers side Indicator?
The drivers side indicator in the front bumper appears to be all fogged up(CONDENSATION). Are they easy to remove and clean?? MY93 WRX.
Gav1.
Gav1.
#2
Former Sponsor
iTrader: (4)
Join Date: Jan 2001
Location: ECU Mapping - www.JollyGreenMonster.co.uk
Posts: 16,548
Likes: 0
Received 2 Likes
on
2 Posts
Yes there is one screw in behind / beside the foglight. and then they lift out that end first.
There should be a bit of rubber pipe on the back which allows condensation out, check it is not blocked or missing.. if missing the water can get in easier.
Might just need taking indoors and the bulb holder removing to allow it to dry.
There should be a bit of rubber pipe on the back which allows condensation out, check it is not blocked or missing.. if missing the water can get in easier.
Might just need taking indoors and the bulb holder removing to allow it to dry.
#3
Former Sponsor
iTrader: (4)
Join Date: Jan 2001
Location: ECU Mapping - www.JollyGreenMonster.co.uk
Posts: 16,548
Likes: 0
Received 2 Likes
on
2 Posts
in fact it is a 10mm bolt that holds your fog light in too
http://www.jollygreenmonster.fotopic.net/p5085984.html
http://www.jollygreenmonster.fotopic.net/p5085984.html
#4
Scooby Regular
Thread Starter
Join Date: Jan 2005
Location: Stoke on Trent
Posts: 436
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Jolly Green Monster
in fact it is a 10mm bolt that holds your fog light in too
http://www.jollygreenmonster.fotopic.net/p5085984.html
http://www.jollygreenmonster.fotopic.net/p5085984.html
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM
Sam Witwicky
Engine Management and ECU Remapping
17
13 November 2015 10:49 AM