P1 offsets
#1
Scooby Newbie
Thread Starter
Join Date: Dec 2004
Location: telford shropshire
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
P1 offsets
guy's,just wanted to know that is the correct offset figure for 18in wheels on a P1 should be as a while back i changed the wheels on my P1 to the same style as O.E. (WRC-1) but went to 18in. I then subsequently added a 355mm 6 pot AP racing brake kit,as a bit of insurance i also added 5mm spacers to ensure no wheel/caliper touching. Only thing that has got me asking this question is that recently i took the car to a specialist dealer who thought that the wheels seemed to be a bit further "out" than they should be.Can anybody please advise, many thanks
#2
Scooby Regular
iTrader: (1)
Join Date: Sep 2003
Location: gravesend, kent
Posts: 4,721
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by alol
guy's,just wanted to know that is the correct offset figure for 18in wheels on a P1 should be as a while back i changed the wheels on my P1 to the same style as O.E. (WRC-1) but went to 18in. I then subsequently added a 355mm 6 pot AP racing brake kit,as a bit of insurance i also added 5mm spacers to ensure no wheel/caliper touching. Only thing that has got me asking this question is that recently i took the car to a specialist dealer who thought that the wheels seemed to be a bit further "out" than they should be.Can anybody please advise, many thanks
#3
Scooby Regular
iTrader: (5)
Join Date: Feb 2003
Location: Worcester
Posts: 2,625
Likes: 0
Received 0 Likes
on
0 Posts
http://www.prodrive.com/defaultflash.asp?M=5
http://www.apracing.com/roadcar/brakekit/data.asp
should help abit
Im looking at fitting these brakes to the same wheel
http://www.apracing.com/roadcar/brakekit/data.asp
should help abit
Im looking at fitting these brakes to the same wheel
Thread
Thread Starter
Forum
Replies
Last Post
ossett2k2
Engine Management and ECU Remapping
15
23 September 2015 09:11 AM