still trying to wire it up
28 December 2004, 08:23 PM
#1
Scooby Regular
Thread Starter
Join Date: Aug 2003
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
still trying to wire it up
just on with changing uk engine for an sti lump. the wires for the coil pack and idle valve are giving problems. this is because the sti coil has 3 wires and the uk has 6 wires . does anyone know which wires i need to use.
same aplies to the idle valve 3 on sti,6 on uk.
any help would be great.
same aplies to the idle valve 3 on sti,6 on uk.
any help would be great.
29 December 2004, 10:36 PM
#4
Scooby Regular
Join Date: Jul 2003
Location: Oooooooop North!
Posts: 2,737
Likes: 0
Received 0 Likes
on
0 Posts
Need more detail mate.
What year is the car that you have?
What year is the STI engine?
Sounds like you might have a Phase 2 STI engine and a Phase 1 car which is a bit of a pain....
Jon.
What year is the car that you have?
What year is the STI engine?
Sounds like you might have a Phase 2 STI engine and a Phase 1 car which is a bit of a pain....
Jon.
29 December 2004, 10:47 PM
#5
Scooby Regular
Thread Starter
Join Date: Aug 2003
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
hello there ,car is my99 and engine is an sti v4 ,coilpack in middle. idle valve over to the left of engine(from behind). valve on old engine built into butterfly valve assy.
cheers burty
cheers burty
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM