Upgrade slanty my95 intercooler?
11 December 2004, 02:49 PM
#1
Scooby Regular
Thread Starter
Join Date: Sep 2003
Location: SMACS member,Resident valeter/pc installer
Posts: 1,472
Likes: 0
Received 0 Likes
on
0 Posts
Upgrade slanty my95 intercooler?
Hello,
I`ve in the process of finding out about an upgrade to my early type of intercooler.(on a my95 tdo5h car)
I know MRT do one, but its very pricey.
I`d ideally like to stay top mount for ease of installation and lower lag.
Who has found a solution?
the only one I`ve manged to find out about is modifying a sti5 version one to fit.
I will be fitting a waterspray to the intercooler too.
Any help in this would be greatly appreciated.
Cheers
*****
I`ve in the process of finding out about an upgrade to my early type of intercooler.(on a my95 tdo5h car)
I know MRT do one, but its very pricey.
I`d ideally like to stay top mount for ease of installation and lower lag.
Who has found a solution?
the only one I`ve manged to find out about is modifying a sti5 version one to fit.
I will be fitting a waterspray to the intercooler too.
Any help in this would be greatly appreciated.
Cheers
*****
11 December 2004, 05:35 PM
#2
Subaru Tuning Specialist
Join Date: Jun 2002
Location: 7.74 @179 mph 1/4 mile - road legal
Posts: 6,654
Likes: 0
Received 1 Like
on
1 Post
Make one ?
A friend made this slightly oversize job for his 97uk, doesn't look to pretty but works really well !!
It is the full width of the scoop !
Andy
A friend made this slightly oversize job for his 97uk, doesn't look to pretty but works really well !!
It is the full width of the scoop !
Andy
Last edited by Andy.F; 11 December 2004 at 05:38 PM.
11 December 2004, 05:58 PM
#3
Scooby Regular
Join Date: May 2002
Location: Taunton
Posts: 1,178
Likes: 0
Received 0 Likes
on
0 Posts
What about the hot air coming up from the turbo???
Sorry for thread hijack but:
I've just fit a 2002 intercooler into my MY94 and having a bit of difficulty with clearance. Can I move the pipe indicated in photo:
http://img.photobucket.com/albums/v1...oolerincar.jpg
Perhaps I can move the mounts for the metal section a bit lower,.. or replace the pipe including metal centre section with one flexible piece that runs under the Intercooler?
Sorry for thread hijack but:
I've just fit a 2002 intercooler into my MY94 and having a bit of difficulty with clearance. Can I move the pipe indicated in photo:
http://img.photobucket.com/albums/v1...oolerincar.jpg
Perhaps I can move the mounts for the metal section a bit lower,.. or replace the pipe including metal centre section with one flexible piece that runs under the Intercooler?
11 December 2004, 06:10 PM
#4
Subaru Tuning Specialist
Join Date: Jun 2002
Location: 7.74 @179 mph 1/4 mile - road legal
Posts: 6,654
Likes: 0
Received 1 Like
on
1 Post
Yes it's just the servo vac line, you can unbolt it and move it down a bit.
This car has the turbo, uppipe and downpipe wrapped with exhaust lagging to keep the heat in.
This car has the turbo, uppipe and downpipe wrapped with exhaust lagging to keep the heat in.
Thread
Thread Starter
Forum
Replies
Last Post
Brzoza
Engine Management and ECU Remapping
1
02 October 2015 05:26 PM