Washer Jets
23 November 2004, 07:56 PM
#1
Scooby Regular
Thread Starter
Join Date: Feb 2004
Location: Texas - It's BIG!
Posts: 2,105
Likes: 0
Received 0 Likes
on
0 Posts
Washer Jets
I'm losing pressure to the right hand washer jet on the drivers side, so three out of four work perfectly, but this one has been losing pressure for a while and is now just a trickle....
I've tried clearing the nozzle with a pin etc, checked the connections under the bonnet and whatnot but nothing obvious springs to mind....
Any ideas, please?
I've tried clearing the nozzle with a pin etc, checked the connections under the bonnet and whatnot but nothing obvious springs to mind....
Any ideas, please?
24 November 2004, 01:12 PM
#3
Drag it!
iTrader: (1)
Join Date: Jun 2002
Location: Flame grilled Wagon anyone?
Posts: 9,866
Likes: 0
Received 0 Likes
on
0 Posts
If a pin hasnt cured it, i would disconnect it, then operate the jet to make sure water comes out of the pipe, then i would take the jet off the bonnet and apply high pressure air through it.
24 November 2004, 01:13 PM
#4
Scooby Regular
Join Date: Jun 2004
Location: Midlands
Posts: 414
Likes: 0
Received 0 Likes
on
0 Posts
only thing i can suggest is to disconnect the left hand washer jet, and plug the end of the pipe.
Then put a pin in the washer jet that works ( on the right hand side ) and leave the one that doesnt work the only one open.
Then try and spray water through, maybe the pressure will push out what ever is blocking it, if anything is.
Then put a pin in the washer jet that works ( on the right hand side ) and leave the one that doesnt work the only one open.
Then try and spray water through, maybe the pressure will push out what ever is blocking it, if anything is.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM