Washer Jets
 

I'm losing pressure to the right hand washer jet on the drivers side, so three out of four work perfectly, but this one has been losing pressure for a while and is now just a trickle....

I've tried clearing the nozzle with a pin etc, checked the connections under the bonnet and whatnot but nothing obvious springs to mind....

Any ideas, please?

Anybody?

If a pin hasnt cured it, i would disconnect it, then operate the jet to make sure water comes out of the pipe, then i would take the jet off the bonnet and apply high pressure air through it.

only thing i can suggest is to disconnect the left hand washer jet, and plug the end of the pipe.
Then put a pin in the washer jet that works ( on the right hand side ) and leave the one that doesnt work the only one open.
Then try and spray water through, maybe the pressure will push out what ever is blocking it, if anything is.