RimP1

Alright lads, i've just bought a set of Samco turbo and coolant hoses for my P1, there are 3 hoses which i can't fathom out where they go, 2 are coolant the other is a turbo one, anybody got any piccies or diagram etc that they could post up for me

Cheers, Ian

Tone Loc

iTrader: (1)

Some of the coolant hoses are only used for MY97/98 cars.... as the kit is made for MY97-00 i'm not surprised you have some left (should be a short straight one and one with a kink in it... these are for the ISCV pre99)

Have a look at Graham Goodes website, it lists what each hose is for.

Tony.

RimP1

Cheers Tony, they do sound like the ones i'm on about, the turbo one is similar to the one which goes from the I/C to the inlet manifold, that is probably for a different version aswell

Cheers, Ian

richiewong

It's not the one that fits under the ic between the alloy Y piece and ic

morpheous

iTrader: (9)

Are these them ?

http://img.photobucket.com/albums/v4...s/hoses001.jpg
large one fits to underside of intercooler from turbo
Short one from i\c to throttle body
Angled one top right of i\c to recirc valve

richiewong

If the P1 has the same ic as my Type R, the Y piece is alloy and therefore does not get replaced by the large Samco silicone one.