Removing Airbag Steering Wheel
01 November 2004, 03:06 PM
#1
Scooby Regular
Thread Starter
Join Date: May 2002
Location: South West
Posts: 1,461
Likes: 0
Received 0 Likes
on
0 Posts
Removing Airbag Steering Wheel
On a MY00. How easy a job is it ? Am I correct in thinking that another Momo steering wheel will fit the oem Momo boss ? and how do you get around the airbag light coming on ? I have removed the HUD on my prev MY93 WRX and found it a nightmare trying to get it all back in and plugging the speedo back in 
So if I need to removed the airbag bulb is it gonna be as difficult ?
Any thought most welcome
So if I need to removed the airbag bulb is it gonna be as difficult ?Any thought most welcome
01 November 2004, 06:47 PM
#2
3 ohm resistor accros the airbag terminal is what you need. This will stop the airbag light illuminating once you have removed the stock wheel.
The MY00 wheel does not come with a Boss as such, it is a complete unit/assembly. The only bit that is seperate is the airbag unit in the middle. This is attached by 2 torx screws, one from either side.
The MY00 wheel does not come with a Boss as such, it is a complete unit/assembly. The only bit that is seperate is the airbag unit in the middle. This is attached by 2 torx screws, one from either side.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
33
29 August 2017 07:18 PM
Scott@ScoobySpares
Full Cars Breaking For Spares
7
14 December 2015 08:16 AM
Mattybr5@MB Developments
Full Cars Breaking For Spares
20
22 October 2015 06:12 AM
