is my actuator weak?
#1
is my actuator weak?
Hi as above i have a 97 impreza wrx import and it has a full decat and induction, i peak at 14-15psi and hold 11, is this normal? i have made no adjustment to boost control, it is still controlled by the ecu
Cheers
Cheers
#2
Hi,
That sounds a touch on the low side, is the gauge accurate? Might be worth cleaning the boost solenoid with some brake cleaner these can get dirty, nothing to loose, search on here for details of how to do it.
George
That sounds a touch on the low side, is the gauge accurate? Might be worth cleaning the boost solenoid with some brake cleaner these can get dirty, nothing to loose, search on here for details of how to do it.
George
#4
Originally Posted by GBruce
Hi,
That sounds a touch on the low side, is the gauge accurate? Might be worth cleaning the boost solenoid with some brake cleaner these can get dirty, nothing to loose, search on here for details of how to do it.
George
That sounds a touch on the low side, is the gauge accurate? Might be worth cleaning the boost solenoid with some brake cleaner these can get dirty, nothing to loose, search on here for details of how to do it.
George
Cleaned the solenoid and still no joy, i suppose it could be the guage, im not running a dump valve at the moment and again i still dont get much chatter, just hear a flutter through the induction. What shall i try next, ps what DV shall i get? im after a recirc, my standard one broke. cheers
#5
Hi,
I have a Bailey VTA one on mine bought from Rally design they also do recirc but I have not tried it. If i was to buy another I would go for something like a Forge one as it seems most people use these. Recirc too as the noise gets tiresome after a while.
George
I have a Bailey VTA one on mine bought from Rally design they also do recirc but I have not tried it. If i was to buy another I would go for something like a Forge one as it seems most people use these. Recirc too as the noise gets tiresome after a while.
George
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM
aaron_ions
General Technical
14
25 September 2015 02:33 PM
aaron_ions
General Technical
1
17 September 2015 10:42 AM