Advice fitting passenger door glass?
#1
Scooby Regular
Thread Starter
Join Date: Sep 2002
Location: Nottingham
Posts: 401
Likes: 0
Received 0 Likes
on
0 Posts
Advice fitting passenger door glass?
I need to replace the passenger side door glass on a UK MY98. Anyone done this and is the procedure in the workshop manual?
Cheers,
Andy
Cheers,
Andy
#2
Scooby Regular
If its anything like fitting/replacing the rears its dead easy
Remove the door skin, and then wind the window down till you can see the bolts through the holes
Undo the bolts, and remove the metal claps which are bolted to the top of the door,, and then the glass should be relatively free to ease out of the door
Replace in reverse of removal
We spent a good hour or so removing one from a rear door, that was no longer attached to a car, and it took about 20 mins or so to do both rear windows on a car which still had power (and the doors attached)
Steve
Remove the door skin, and then wind the window down till you can see the bolts through the holes
Undo the bolts, and remove the metal claps which are bolted to the top of the door,, and then the glass should be relatively free to ease out of the door
Replace in reverse of removal
We spent a good hour or so removing one from a rear door, that was no longer attached to a car, and it took about 20 mins or so to do both rear windows on a car which still had power (and the doors attached)
Steve
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
33
29 August 2017 07:18 PM
Scott@ScoobySpares
Full Cars Breaking For Spares
7
14 December 2015 08:16 AM